IDC Series

Super Series

Micro Series

Smart Series

Products

Our 100% Guarantee

Clean Resources has set the bar for compressor condensate management. When properly sized and installed, our systems are guaranteed to reduce the contaminants in your compressor condensate to < 10 ppm for the life of the unit. If your unit fails under these conditions, Clean Resources will replace the failed unit or provide a refund through your distributor.

How It Works

We engineered our condensate systems to provide EPA compliant results. As the condensate from the waste stream drains into the unit through the inlet hub, it comes into contact with our proprietary alumina silicate substrate media. These beds adsorb the lubricant, permanently bonding with the media while repelling the water for clean, easy disposal.

Works With All Compressor Lubricants

It’s simple. Our condensate systems work with all lubricants, not just a few. One product, one solution.

Products

Our 100% Guarantee

Clean Resources has set the bar for compressor condensate management. When properly sized and installed, our systems are guaranteed to reduce the contaminants in your compressor condensate to < 10 ppm for the life of the unit. If your unit fails under these conditions, Clean Resources will replace the failed unit or provide a refund through your distributor.

How It Works

We engineered our condensate systems to provide EPA compliant results. As the condensate from the waste stream drains into the unit through the inlet hub, it comes into contact with our proprietary alumina silicate substrate media. These beds adsorb the lubricant, permanently bonding with the media while repelling the water for clean, easy disposal.

Works With All Compressor Lubricants

It’s simple. Our condensate systems work with all lubricants, not just a few. One product, one solution.

IDC
Series

SUPER
Series

MICRO
Series

SMART
Series

IDC Series

The Most Effective
Active Molecular Filtration

  • No maintenance required
  • Internal decompression chamber
  • No mess
  • Best value oil/water separator
    in the market
  • Industrial design
  • Efficiently & effectively removes all oils,
    including glycol-based lubricants
  • Cradle to grave warranty
  • System monitoring for timely change out
  • No exposure to black mold, bacteria
    or E. coli
  • No messy bag change-outs

IDC-350

The IDC-350 allows smaller industry compressors the ability to maintain EPA compliance easily. Like other units in the IDC series, the 350 uses an alumina silicate substrate media bed that prolongs the life of the unit and has an internal decompression chamber. All you need to do is prime the IDC-350 and run your condensate lines.
Learn More

The IDC-350 allows smaller industry compressors the ability to maintain EPA compliance easily. Like other units in the IDC series, the 350 uses an alumina silicate substrate media bed that prolongs the life of the unit and has an internal decompression chamber. All you need to do is prime the IDC-350 and run your condensate lines.

As with all Clean Resources products, the IDC-350 is designed to handle all compressor lubricants without regard to specific gravity, emulsification, or relative humidity. The IDC-350 is GUARANTEED to reduce compressor condensate to less than 10ppm for the life of the unit, or we will provide a refund through your distributor.

IDC-350 provides an easy, convenient, and cost-effective method to keep your compressor room EPA compliant. The IDC-350 uses no electricity, is maintenance-free, requires no pump, and is not susceptible to mold growth. All IDC-350 units can be disposed of as non-hazardous special waste, provided the liquid has been drained. Should your landfill not accept the spent unit, it can be returned to one of our sites. Fill out the disposal form at www.recycleoilsep.com and follow the instructions.

IDC-500—2000

IDC-PAKs provide a convenient and cost-effective method to keep your compressor room EPA compliant. The innovative IDC-PAK requires no electricity, is maintenance free and mold resistant. The lubricant absorbing media used in the IDC units can be disposed of as non-hazardous special waste once the liquid has been drained.
Learn More

IDC-PAKs provides a convenient and cost-effective method to keep your compressor room EPA compliant. The innovative IDC-PAK requires no electricity, is maintenance-free and mold resistant. The lubricant absorbing media used in the units can be disposed of as non-hazardous special waste once the liquid has been drained.

The IDC-PAKs have been designed using an alumina silicate substrate media that prolongs the life of the unit. It also comes with a durable, onboard decompression chamber. These units ship complete with a five inlet hub, five hose barbs, an inlet hose, and an outlet hose. Prime the unit and run your condensate lines to the inlet. With the IDC-PAKs, there is no need for a separate decompression chamber.

These IDC-PAKs provide improved performance, a longer lifespan, simple single-step installation, and a lower profile. In addition, the sizing of the unit has been done to make it easy for service personnel or the client to become better aware of when to change the unit.

IDC Series

The Most Effective Active Molecular Filtration

  • No maintenance required
  • Internal decompression chamber
  • No mess
  • Best value oil/water separator
    in the market
  • Industrial design
  • Efficiently & effectively removes all oils,
    including glycol-based lubricants
  • Cradle to grave warranty
  • System monitoring for timely change out
  • No exposure to black mold, bacteria
    or E. coli
  • No messy bag change-outs

IDC-350

The IDC-350 allows smaller industry compressors the ability to maintain EPA compliance easily. Like other units in the IDC series, the 350 uses an alumina silicate substrate media bed that prolongs the life of the unit and has an internal decompression chamber. All you need to do is prime the IDC-350 and run your condensate lines.
Learn More

IDC-500—2000

IDC-PAKs provide a convenient and cost-effective method to keep your compressor room EPA compliant. The innovative IDC-PAK requires no electricity, is maintenance free and mold resistant. The lubricant absorbing media used in the IDC units can be disposed of as non-hazardous special waste once the liquid has been drained.
Learn More


SMART-PAK Series

Replaceable Cartridges Equipped with Encrypted “Smart Technology”

The Smart-Pak offers an EPA compliant installation for compressed air systems. The small footprint design and lightweight system combine for a perfect solution to mezzanine installations and crowded compressor rooms.

The new sleek design of the cabinet, partnered with “smart” technology in the cartridge systems, offers a mess-free installation, guaranteed performance, and provides aftermarket security.

Our new encrypted “Smart Technology” is an electronic signature between the cabinet and cartridge, eliminating non-authorized parts from being used.


SMART-PAK Series

Replaceable Cartridges Equipped with
Encrypted “Smart Technology”

The Smart-Pak offers an EPA compliant installation for compressed air systems. The small footprint design and lightweight system combine for a perfect solution to mezzanine installations and crowded compressor rooms.

The new sleek design of the cabinet, partnered with “smart” technology in the cartridge systems, offers a mess-free installation, guaranteed performance, and provides aftermarket security.

Our new encrypted “Smart Technology” is an electronic signature between the cabinet and cartridge, eliminating non-authorized parts from being used.


SUPER-PAK Series

Large Compressed Air Systems

The Super Pak by Clean Resources offers large compressed air systems a strong, reliable oil-water separator. Standard systems are designed for 4,000-10,000 CFM applications.

    Benefits of the Super-Pak Series

  • Small footprint for large HP systems
  • Ships from factory pre-plumbed, primed
    and leak tested
  • Three layers of redundancy
  • System capacity functions on ALL
    compressor lubricants
  • Custom decompression chamber

  • No messy bag change-outs
  • Ships on a 48” X 48” super
    duty pallet
  • No exposure to mold, bacteria or E. coli
  • No maintenance required
  • System monitoring for timely change out

SUPER-PAK Series

Large Compressed Air Systems

The Super Pak by Clean Resources offers large compressed air systems a strong, reliable oil-water separator. Standard systems are designed for 4,000-10,000 CFM applications.

    Benefits of the Super-Pak Series

  • Small footprint for large HP systems
  • Ships from factory pre-plumbed, primed and leak tested
  • Three layers of redundancy
  • System capacity functions on ALL compressor lubricants
  • Custom decompression chamber
  • No messy bag change-outs
  • Ships on a 48” X 48” super duty pallet
  • No exposure to mold, bacteria or E. coli
  • No maintenance required
  • System monitoring for timely change out

MICRO Series

Benefits of the
MICRO & MICRO Plus

  • Custom-built wall bracket for ease
    of installation
  • Threaded spin on/off cartridges for no mess, quick maintenance
  • No priming required
  • Clean Resources 10 ppm guarantee
  • Handles all compressor lubricants
  • Media operates regardless of specific gravity, relative humidity or emulsification

Designed for smaller
compressed air systems

This system was designed as an economical solution for small compressed air systems, up to 125 psi.

The product offerings also include a factory-installed and plumbed wall bracket, reducing installation time.

Replacement cartridges provide easy, no mess maintenance and offer the lowest life cycle cost in the industry.

MICRO Series

    Benefits of the MICRO & MICRO Plus

  • Custom-built wall bracket for ease
    of installation
  • Threaded spin on/off cartridges for no mess, quick maintenance
  • No priming required
  • Clean Resources 10 ppm guarantee
  • Handles all compressor lubricants
  • Media operates regardless of specific gravity, relative humidity or emulsification

Designed for smaller compressed air systems

This system was designed as an economical solution for small compressed air systems, up to 125 psi.

The product offerings also include a factory-installed and plumbed wall bracket, reducing installation time.

Replacement cartridges provide easy, no mess maintenance and offer the lowest life cycle cost in the industry.


Clean Resources Logo

Keeping the environment clean,
one drop at a time.

FIND US

1540 Louis Bork Drive
Batavia, IL 60510

Copyright ©2020 Clean Resources
All Rights Reserved