Our 100% Guarantee
Clean Resources has set the bar for compressor condensate management. When properly sized, installed, and registered, our systems are guaranteed for 12 months to perform and reduce the contaminants in your compressor condensate to 10 ppm or less*. If your unit fails under these conditions, Clean Resources will refund the prorated amount remaining on the warranty if a registered unit fails within one year from installation.
*Methods tested: EPA1664b, EPA8270, EPA624 & EPA625 EPA8015c
How It Works
We engineered our condensate systems to provide EPA compliant results. As the condensate from the waste stream drains into the unit through the inlet hub, it comes into contact with our proprietary alumina silicate substrate media. These beds adsorb the lubricant, permanently bonding with the media while repelling the water for clean, easy disposal.
Works With All Compressor Lubricants
It’s simple. Our condensate systems work with all lubricants, not just a few. One product, one solution.
Our 100% Guarantee
Clean Resources has set the bar for compressor condensate management. When properly sized, installed, and registered, our systems are guaranteed for 12 months to perform and reduce the contaminants in your compressor condensate to 10 ppm or less*. If your unit fails under these conditions, Clean Resources will refund the prorated amount remaining on the warranty if a registered unit fails within one year from installation.
*Methods tested: EPA1664b, EPA8270, EPA624 & EPA625 EPA8015c
How It Works
We engineered our condensate systems to provide EPA compliant results. As the condensate from the waste stream drains into the unit through the inlet hub, it comes into contact with our proprietary alumina silicate substrate media. These beds adsorb the lubricant, permanently bonding with the media while repelling the water for clean, easy disposal.
Works With All Compressor Lubricants
It’s simple. Our condensate systems work with all lubricants, not just a few. One product, one solution.
The IDC-350 allows smaller industry compressors the ability to maintain EPA compliance easily. Like other units in the IDC series, the 350 uses an alumina silicate substrate media bed that prolongs the life of the unit and has an internal decompression chamber. All you need to do is prime the IDC-350 and run your condensate lines.
Learn More
The IDC-350 allows smaller industry compressors the ability to maintain EPA compliance easily. Like other units in the IDC series, the 350 uses an alumina silicate substrate media bed that prolongs the life of the unit and has an internal decompression chamber. All you need to do is prime the IDC-350 and run your condensate lines.
As with all Clean Resources products, the IDC-350 is designed to handle all compressor lubricants without regard to specific gravity, emulsification, or relative humidity. The IDC-350 is GUARANTEED to reduce compressor condensate to less than 10ppm for the life of the unit, or we will provide a refund through your distributor.
IDC-350 provides an easy, convenient, and cost-effective method to keep your compressor room EPA compliant. The IDC-350 uses no electricity, is maintenance-free, requires no pump, and is not susceptible to mold growth. All IDC-350 units can be disposed of as non-hazardous special waste, provided the liquid has been drained. Should your landfill not accept the spent unit, it can be returned to one of our sites. Fill out the disposal form at www.recycleoilsep.com and follow the instructions.
IDC-PAKs provide a convenient and cost-effective method to keep your compressor room EPA compliant. The innovative IDC-PAK requires no electricity, is maintenance free and mold resistant. The lubricant absorbing media used in the IDC units can be disposed of as non-hazardous special waste once the liquid has been drained.
Learn More
IDC-PAKs provides a convenient and cost-effective method to keep your compressor room EPA compliant. The innovative IDC-PAK requires no electricity, is maintenance-free and mold resistant. The lubricant absorbing media used in the units can be disposed of as non-hazardous special waste once the liquid has been drained.
The IDC-PAKs have been designed using an alumina silicate substrate media that prolongs the life of the unit. It also comes with a durable, onboard decompression chamber. These units ship complete with a six port inlet hub and an outlet hose. Prime the unit and run your condensate lines to the inlet. With the IDC-PAKs, there is no need for a separate decompression chamber.
These IDC-PAKs provide improved performance, a longer lifespan, simple single-step installation, and a lower profile. In addition, the sizing of the unit has been done to make it easy for service personnel or the client to become better aware of when to change the unit.
The IDC-350 allows smaller industry compressors the ability to maintain EPA compliance easily. Like other units in the IDC series, the 350 uses an alumina silicate substrate media bed that prolongs the life of the unit and has an internal decompression chamber. All you need to do is prime the IDC-350 and run your condensate lines.
Learn More
IDC-PAKs provide a convenient and cost-effective method to keep your compressor room EPA compliant. The innovative IDC-PAK requires no electricity, is maintenance free and mold resistant. The lubricant absorbing media used in the IDC units can be disposed of as non-hazardous special waste once the liquid has been drained.
Learn More
The Super Pak by Clean Resources offers large compressed air systems a strong, reliable oil-water separator. Standard systems are designed for 4,000 – 10,000 CFM applications.
The Super Pak by Clean Resources offers large compressed air systems a strong, reliable oil-water separator. Standard systems are designed for 4,000-10,000 CFM applications.
This system was designed as an economical solution for small compressed air systems, up to 125 psi.
The product offerings also include a factory-installed and plumbed wall bracket, reducing installation time.
Replacement cartridges provide easy, no mess maintenance and offer the lowest life cycle cost in the industry.
This system was designed as an economical solution for small compressed air systems, up to 125 psi.
The product offerings also include a factory-installed and plumbed wall bracket, reducing installation time.
Replacement cartridges provide easy, no mess maintenance and offer the lowest life cycle cost in the industry.
1540 Louis Bork Drive
Batavia, IL 60510
all Clean Resources products comply with the Buy American Act
Copyright ©2022 Clean Resources All Rights Reserved